Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!

5.45x39 16" Carbine Base Upper

Product Code: FGAA-01052

Availability: Limited stock

5.45x39 16" Carbine Base Upper

Special Price $419.99

Regular Price: $636.39



The 5.45x39 Carbine Base 16" Upper comes complete and ready to go onto any mil-spec AR 15 lower. This upper is built with the Adams Arms proprietary piston system. The piston system parts and the barrel have been treated with our salt nitride Meloniting process making them harder and more corrosive resistant than hard chrome. The bolt and bolt carrier have also been protected by using an ion bond finish. Now you have the ability to shoot the inexpensive corrosive mil-surp ammo without fear of the parts being unduly worn out. Each upper also comes with a 30 round magazine and a Wolff extra power hammer spring to ignite the older hardened primers.


Upper Receiver: A4 Flat-Top, Forged

Barrel Length: 16"

Barrel Contour: Government

Barrel Material: 4150 Chrome Moly Vanadium Steel

Muzzle Thread Pattern: 1/2"-28

Chrome Lined: No

Barrel Finish: QPQ Melonite / Black Nitride

Twist Rate: 1 in 8"

Chamber: 5.45x39

M4 Feed Ramps: Yes

Bolt Carrier: 1-Piece w/Integral Piston Strike Face

Muzzle Device: Lifecoat A2 Flash Hider

Gas System Length: Carbine, Short Stroke Piston Operated

Gas Block Diameter: 0.750"

Handguard: 2-Piece Polymer, Carbine-Length

Sights: None, Single Rail Gas Block

Weight: 4.179 lbs


Customer Reviews 1 item(s)

Spent case sticks in chamber
I purchased my 5.45x39 upper from Huldra Arms. I first want to say that customer service at Huldra and Adams Arms is superb. The only issue is that if you fire the rifle in the single shot gas mode, the spent case will stick in the chamber and you will have to pry or drive it out. It will not eject when you pull the charging handle. It might work if brass cased ammo existed in the caliber. You may never want to use this function but it should be noted by Huldra and Adams so the customer is aware of this before purchase. The rifle is perfect in every other way. It has been sent to Huldra and Adams with the same result. They both gave it an excellent try but the fact is it just won't work.

Review by Jay / (Posted on 8/16/2014)
Add Your Review

You may also be interested in the following product(s)